Maytag MSF25D4MDM Use and Care Manual download pdf (Page 13)

Turning the Ice Maker On/Off

■ To turn on the ice maker, lift open the ice maker door and

lower the wire shutoff arm to the ON position.

■ To manually turn off the ice maker, lift the wire shutoff arm to

the OFF (arm up) position and listen for the click. Ice can still

be dispensed, but no more can be made.

NOTE: Your ice maker has an automatic shutoff. As ice is made,

the ice cubes will fill the ice storage bin, and the ice cubes will

raise the wire shutoff arm to the OFF (arm up) position. Do not

force the wire shutoff arm up or down.

Removing and Replacing the Ice Storage Bin

1. Lift and hold open the ice maker door.

2. Lift the wire shutoff arm so it clicks into the OFF (up) position.

Release the ice maker door.

3. Lift up the front of the storage bin and pull it out.

4. Replace the bin by pushing it in all the way, or the dispenser

will not work.

5. To restart ice production, lift open the ice maker door and

push the wire shutoff arm down to the ON position.

Water Filtration System

Water Filter Status Light

The filter status light will help you know when to change your

water filter. Depending on your model, the status light will appear

as one of the following icons:

■ The light will appear in yellow on the dispenser display screen

when it is almost time to change the filter.

■ It is recommended that you replace the filter when the status

light changes to red OR water flow to your water dispenser or

ice maker decreases noticeably.

NOTE: The filter should be replaced at least every 6 months,

depending on your water quality and usage.

Resetting the Filter Status

■ After changing the filter, reset the filter status light by pressing

FILTER RESET.

The status light will turn off when the system is reset.

Changing the Water Filter

1. Locate the water filter cover door in the base grille, and pull

open the filter door. The filter will be released and then be

ejected as the door is opened.

2. When the door is completely open, pull the filter straight out.

NOTE: There may be some water in the filter. Some spilling

may occur. Use a towel to wipe up any spills.

3. Take the new filter out of its packaging and remove the cap.

Be sure the O-rings are still in place after the cap is removed.

4. With the arrow pointing to the left (toward the filter cover

door’s hinge), align the new filter with the filter housing and

slide it into place. The filter cover door will automatically begin

to close as the new filter is inserted.

5. Close the filter cover door completely in order to snap the filter

into place. You may need to press hard.

6. Flush the water system. See “Water and Ice Dispensers.”

Style 1: Style 2: Style 3:

Do not use with water that is microbiologically unsafe or

of unknown quality without adequate disinfection before

or after the system. Systems certified for cyst reduction

may be used on disinfected waters that may contain

filterable cysts.

A. Water filter cover door

A. Cap B. O-rings

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Comments to this Manuals

No comments

Maytag MSF25D4MDM Use and Care Manual Page 13

Comments to this Manuals

Related products and manuals for Fridges Maytag MSF25D4MDM