Maytag MGDX6STBW Installation Guide download pdf (Page 23)

Remove door strike and door strike label from dryer cabinet.

Insert the door strike into hole where door strike label was

removed and secure with screw. Cover original door strike

hole with door strike label and press rmly into place.

Remove door strike and door

strike label

10.

Door strike labelDoor strike

Remove and transfer plugs

11.

Remove the 4 screws that attach 2 plugs on the left side.

Transfer plugs to opposite side using the same 4 screws.

Insert screws in hinge holes on

dryer cabinet

12.

NOTE: 2 people may be needed to reinstall door.

Insert screws into the bottom holes on left side of dryer

cabinet. Tighten screws halfway. Position door so large end of

door hinge slot is over screws. Slide door up so screws are in

bottom of slots. Tighten screws. Insert and tighten top screws

in hinges.

Check door strike alignment

13.

Close door and check that door strike aligns with door catch.

If it is needed, slide door catch left or right within slot to

adjust alignment.

Troubleshooting

See the Use and Care Guide or visit our website and

reference “Frequently Asked Questions” to possibly avoid

the cost of a service call.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

No comments

Maytag MGDX6STBW Installation Guide Page 23