Maytag W10188238A User Manual

MICROWAVE HOOD COMBINATIONINSTALLATION INSTRUCTIONSMICROWAVE HOOD COMBINATION SAFETYThis product is suitable for use above electric or gas cooking pro

10VENTING DESIGN SPECIFICATIONSThis section is intended for architectural designer and builder/contractor reference only.NOTES: Vent materials needed

11Recommended Vent LengthA 3¹⁄₄" x 10" (8.3 x 25.4 cm) rectangular or 6" (15.2 cm) round vent should be used.The total length of the ve

W10188238ASP PN W10188947A© 2008.All rights reserved.DE68-03534A9/08Printed in Malaysia

2INSTALLATION REQUIREMENTSTools and PartsTools NeededGather the required tools and parts before starting installation. Read and follow the instruction

3Installation DimensionsNOTE: The grounded 3 prong outlet must be inside the upper cabinet. See “Electrical Requirements” section.*30" (76.2 cm)

4INSTALLATION INSTRUCTIONSRemove Mounting PlateNOTE: To avoid possible damage to the work surface, cover the work surface.1. Remove any remaining cont

56. Attach damper assembly to the rear exhaust vent opening by sliding it down into the guides on both sides of the opening, and pushing it into the l

6Locate Wall Stud(s)NOTE: If no wall studs exist within the cabinet opening, do not install the microwave oven.See illustrations in “Possible Wall Stu

75. With the support tabs facing forward (see illustrations in “Locate Wall Stud(s)” section, align the mounting plate center marker to the centerline

8Prepare Upper Cabinet1. Disconnect power to outlet.2. Remove all contents from upper cabinet.3. Place Upper Cabinet Template against the bottom of th

96. Push microwave oven against mounting plate and hold in place.NOTE: If microwave oven does not need to be adjusted, skip steps 7-9.7. If adjustment