Maytag SkyBox MBV1976AA User Manual download pdf (Page 14)

Maintenance

Cleaning

To avoid electrical shock, which can cause severe

personal injury or death, unplug the refrigerated

personal beverage vendor unit before cleaning.

The modular design of your SkyBox™ personal

beverage vendor allows for easy cleaning. Most spills

can be cleaned up with a damp cloth or sponge. If

using a household cleaner, choose a mild, non-

abrasive cleaner that will not scratch or dull the

surface of your unit. Do not allow beverage spills to

stand; clean up right away.

To avoid spills, do not store previously opened or

partially consumed bottles/cans in the SkyBox™

personal beverage vendor.

Removing The Door

1. Make sure the main unit is OFF and the power

cord is unplugged.

2. Unplug the door wire harness from the lower right

corner of the door and the lower left corner of the

personal beverage vendor.

3. Open the door wider than a 90° angle.

4. Lift the door up, releasing the door hinges from the

hinge posts.

Clearing Jams

If a jam occurs, the low-indicator lights will flash to

indicate the problem. If a single light is flashing, this

indicates that the jam is located within the corres-

ponding storage bin. If all lights are flashing, this

indicates the jam is most likely located in the dispens-

ing pathway. Most jams result from improper loading,

so please refer to pages 10-11 for proper loading

instructions.

To clear a jam open the SkyBox™ personal beverage

vendor door and inspect the dispensing pathway and

the storage bins. Remove or readjust the location of

the beverage containers.

Opening the door to clear the jam will eliminate the

blinking lights.

Consider the following checklist.

• Have you loaded the beverage containers on their

sides all the way to the back with the tops facing

forward?

• Are your beverage containers no more than 3" in

diameter?

• Are you using cans or bottles of odd shapes or

sizes? If so, loading your SkyBox™ personal beverage

vendor with a single row of that product may help to

reduce jams.

• Is your personal beverage vendor crowded beyond its

capacity?

• Has the personal beverage vendor fully cooled

down? Some jams are more likely to occur when the

vendor is first plugged in and has not fully cooled.

Replacing Display Panel Light

Bulbs

1. Make sure SkyBox™ personal beverage vendor is

OFF and the power cord is unplugged.

2. Flip up the graphic access cover, exposing a screw

and the top edge of the front display panel.

3. Remove the screw.

4. Slide the front display graphic up and out of the

personal beverage vendor.

5. Lift the clear panel up and out of the unit, exposing

the sockets for the light bulbs.

6. Remove bulbs by rotating the bulbs toward you.

7. Install new 18" fluorescent bulbs type F15T8, 15

watt by sliding them into the light sockets and

rotating the bulbs away from you until they click

into place.

8. Replace the clear panel and slide the front display

graphic back into place in front of the clear panel,

behind the lower edge of the frame opening.

9. Reinsert the screw.

10. Flip the graphic access cover back down into place.

WARNING

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Comments to this Manuals

No comments

Maytag SkyBox MBV1976AA User Manual Page 14

Comments to this Manuals

Related products and manuals for Water dispensers Maytag SkyBox MBV1976AA