Maytag Ice2O MFI2665XEM Owner's Manual download pdf (Page 47)

Installation

Pullout Freezer Drawer

To avoid electrical shock which can cause severe

personal injury or death, disconnect power to

refrigerator before removing doors. After replacing

doors, connect power

WARNING

To avoid possible injury, product, or property

damage, you will need two people to perform the

following instructions. Important: Always unload

food in freezer trays before removing trays.

CAUTION

3. Remove Phillips screws from

each of the drawer slides.

Door Reinstallation

1. Install hinge assemblies:

• Install center hinge with

Phillips screws.

2. Place hinge side of refrigerator

door on center hinge pin.

• Install top hinge with

⁄16” hex head screws.

3. While holding refrigerator door upright, tighten

down top hinge with

⁄16” hex head driver.

4. Reconnect connector.

5. Connect the waterline

tubes firmly by pushing one

waterline inside the other.

6. Slide the black locking

collar fully forward.

7. Hold tabbed section of

waterline.

8. Rotate black locking collar

counterclockwise locking

water line

s in place. A

“click” is heard ensuring

waterlines are correctly

locked in place. The “arrow”

on the tabbed section should

align with the 2 bars on the

black locking collar.

9. Ensure the connection does

not leak before installing the

upper hinge cover

10. Replace top hinge covers.

To Remove:

1. Pull drawer open to full

extension.

Slide freezer drawer forward

and lift straight out.

4. Lift top of drawer front to

unhook the drawer from the

slides.

5. Move drawer slides fully

forward.

6. Lift out lower drawer assembly.

Connector

Tabs

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 70 71

Comments to this Manuals

No comments

Maytag Ice2O MFI2665XEM Owner's Manual Page 47

Comments to this Manuals

Related products and manuals for Side-by-side fridge-freezers Maytag Ice2O MFI2665XEM