Maytag Dishwasher MDB-7 User Manual download pdf (Page 7)

Cycles, Options and Lights

Lights/Display

Delay

The Delay option can be used to automatically start

the cycle at a later time to reduce daytime heat

buildup in the home or to take advantage of reduced

energy costs if available in your area. This option is

also useful for conserving hot water at times of high

household usage (showers, laundry).

To set up a Delay:

1. Select the appropriate cycle and options for the

load. Close the door.

2. Press the Delay pad until the desired amount of

delay time is selected.

3. The Delay indicator and the count down display

(select models) will flash until the START/Cancel

pad is pressed.

4. As soon as the START/Cancel pad is pressed, the

flashing will stop and the delay time will begin

counting down. The Delay indicator will remain lit

until the delay time has counted down.

5. The cycle will automatically start as soon as the

delay time expires.

Note

• If 30 seconds elapse between setting the cycle

and options and pressing the START/Cancel

pad, the dishwasher will turn off.

To cancel a Delay:

When the delay is counting down, press the Delay pad

again. The indicator light will go out and the cycle will

start or resume immediately.

To cancel a Delay and the cycle:

• Press START/Cancel once to drain and turn off the

dishwasher.

• Press START/Cancel twice to turn dishwasher off

without draining.

Lights/Display

(select models)

INDICATOR DESCRIPTION

CLEAN Light

WASH/DRY Light

SANITIZED Light

(select models)

Illuminates at the end of the cycle and remains lit until the door has been open for 30 seconds

continuously.

Illuminates during all rinse, wash and dry portions of the cycle.

Illuminates at the end of the cycle when conditions have been met to achieve sanitization. The light will

remain lit until the door has been open for 30 seconds continuously.

Notes

•When Sanitize is selected, cycles are monitored to assure sanitization. The SANITIZED light will not activate if sanitization

requirements are not met. This could happen if the cycle is interrupted, power failure occurs or incoming water

temperature is below 120° F (49° F).

•The CLEAN and SANITIZED indicator lights (select models) will not relight after a power failure until after the next cycle is run.

Most tableware, cookware and flatware can safely be washed in your dishwasher. Check with the manufacturer.

What Can and Cannot Be Washed

Yes, except anodized.

Yes, except antique or

hand-painted.

Yes, except antique or

delicate crystal.

Not recommended.

High water temperature and detergents may affect finish.

Seasoning will be removed, and iron will rust.

Always check manufacturer’s recommendation before washing. Antique, hand-

painted or over-the-glaze patterns may fade. Gold leaf may discolor.

Always check manufacturer’s recommendation before washing. Some types of

leaded crystal may etch with repeated washings.

May leave a dingy deposit or stain on dishwasher interior.

Crystal

Cast Iron

Aluminum

China/Stoneware

MATERIAL DISHWASHER SAFE? SPECIAL INFORMATION

Filters

Cont.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Comments to this Manuals

No comments

Maytag Dishwasher MDB-7 User Manual Page 7

Comments to this Manuals

Related products and manuals for Dishwashers Maytag Dishwasher MDB-7