Maytag MGC7430W User Manual download pdf

PRODUCT MODEL NUMBERS

PRODUCT DIMENSIONS

MGC7430W

MGC7536W

MGC7630W

MGC7636W

Type of Gas

Natural Gas: This cooktop is design-certified by CSA

International for use with Natural gas or, after proper

conversion, for use with LP gas.

●

This cooktop is factory set for use with Natural gas. If

converting to LP gas, see the “LP Gas Conversion”

instructions provided in the package containing literature.

The model/serial rating plate located on the underside of

the cooktop base has information on the types of gas that

can be used. If the types of gas listed do not include the

type of gas available, check with the local gas supplier.

LP Gas Conversion: Conversion must be done by a

qualified service technician.

No attempt shall be made to convert the cooktop from the

gas specified on the model/serial rating plate for use with a

different gas without consulting the serving gas supplier. See

the Gas Conversion instructions provided in the package

containing literature.

Gas Supply Line

●

Provide a gas supply line of ³⁄₄" (1.9 cm) rigid pipe to the

cooktop location. A smaller size pipe on longer runs may

result in insufficient gas supply. Pipe-joint compounds that

resist the action of LP gas must be used. Do not use

TEFLON

®†

tape. With LP gas, piping or tubing size should

be ¹⁄₂" minimum. Usually, LP gas suppliers determine the

size and materials used in the system.

†®TEFLON is a registered trademark of E.I. Du Pont Nemours and

Company.

30" (76.2 cm) and 36" (91.4 cm) Gas Built-In Cooktop

Because Whirlpool Corporation policy includes a continuous commitment to improve

our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Instructions packed with product. Specifications subject to change without notice.

Ref. W10268392A

10/26/09

36" (91.4 cm) Model

30" (76.2 cm) Model

LOCATION REQUIREMENTS

IMPORTANT: Observe all governing codes and ordinances.

Do not obstruct flow of combustion and ventilation air.

●

It is the installer’s responsibility to comply with installation

clearances specified on the model/serial rating plate. The

model/serial rating plate is located on the underside of the

cooktop base.

●

To eliminate the risk of burns or fire by reaching over

heated surface units, cabinet storage space located above

the surface units should be avoided. If cabinet storage is to

be provided, the risk can be reduced by installing a range

hood that projects horizontally a minimum of 5" (12.7 cm)

beyond the bottom of the cabinets.

●

The cooktop must be a specified cooktop that is approved

to be installed either alone or over an undercounter built-in

oven. Check the cooktop base approved installation label

for your cooktop model number and approved

combinations of cooktops and ovens that can be installed.

If you do not find this label, your cooktop may not be

approved for use over an undercounter built-in oven.

Contact your dealer to confirm that your cooktop is

approved.

●

Ovens approved for this type of installation will have an

approval label located on the top of the oven. If you do not

find this label, contact your dealer to confirm that your

oven is approved. Refer to oven manufacturer’s Installation

Instructions for approval for built-in undercounter use and

proper cutout dimensions.

●

The cooktop should be installed in a location away from strong draft areas, such as

windows, doors and strong heating vents or fans.

●

All openings in the wall or floor where cooktop is to be installed must be sealed.

IMPORTANT: To avoid damage, check with your builder or cabinet supplier to

make sure that the materials used will not discolor, delaminate or sustain other

damage.

Mobile Home - Additional Installation Requirements

The installation of this cooktop must conform to the Manufactured Home

Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal

Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). When

such standard is not applicable, use the Standard for Manufactured Home

Installations, ANSI A225.1/NFPA 501A or with local codes.

In Canada, the installation of this cooktop must conform with the current standards

CAN/CSA-A240-latest edition, or with local codes.

A. Model/serial rating plate

Page 1 of 2

1 2

A. Model/serial rating plate 1

Summary of Contents

Page 1 - A. Model/serial rating plate

PRODUCT MODEL NUMBERSPRODUCT DIMENSIONSMGC7430WMGC7536WMGC7630WMGC7636WType of GasNatural Gas: This cooktop is design-certified by CSAInternational fo

Page 2

Because Whirlpool Corporation policy includes a continuous commitment to improveour products, we reserve the right to change materials and specificati